Single or Dual Spindle ID Grinding
The Phoenix ID Grinder is Weldon's new compact ID Grinder. The Phoenix can automatically grind diameters, tapers, chamfers, radii, shoulders, and contours in one set-up and one continuous operation using a FANUC CNC control.
The Dual Spindle option offers the possibility to grind two different surfaces in one setup or accomplish a rough and finish grind in a single chucking. The grinder can be configured with spindles to best match the diameters that are being ground for the highest possible performance. The addition of a variable speed rotary dresser allows for dressing of both aluminum oxide and superabrasive grinding wheels.
Download a PDF of our Phoenix Brochure
Read our latest Phoenix Case Studies:
FANUC model 32i B CNC Control with Color LCD
160 meters part program storage, 63 PGMS
Shear Damper machine base
Precision cross-roller linear way system
Low inertia break-away coupling, X axis
Automatic Trabon lubrication system
Heavy-duty live spindle workhead, 6A2, #5 MT
Servo work drive, 5HP, 0 to 600 RPM
Air conditioned electrical panel
Work area lighting
Workhead mounted diamond adapter
Coolant plumbing and bed-wash system
Grinding wheel and quill
Maximum work swing: 16 "
Work piece weight: 200 lbs. (nominal)
Heavy-duty, preloaded precision angular contact bearings
Spindle nose (ASME Standard): 6" A2
1.062" through-hole diameter for draw bars and air tubes
Spindle speed range is infinitely variable 0-900 RPM.
Motor: FANUC AC digital servo
Work table slide travel
Wheel Speed: 30,000 RPM
Motorized wheel spindle (high frequency)
FANUC AC digital servo drives command resolution, least programmable increment: 0.000010"
Wheel Spindle: Air/Oil
Workhead spindle: Permanent grease-packed
Ballscrews: Automatic lube oil
Ways: Automatic lube oil
Safety detect interlock to prevent cycling of operation if low air pressure or low oil level is sensed automatic programmed cycle to lubricate machine when started up
Wired in accordance with IEC standards, 460 VAC, 3-phase, 60 Hertz.
Pneumatics (air moisture: 70° F. dew point maximum)
Air Pressure: 80 psi
Air Volume: 5 SCFM
Note: System requires a filtered and dry air source
CNC Control Specifications - FANUC 32i B
Manual pulse generator
Full linear and circular contouring
FANUC and AC digital servo systems
Direct RPM programming or constant surface feet built-in diagnostics
10" high-resolution color LCD
Automatic recognition of EIA or ISO coding
Absolute/Incremental programming software over trave checking
RS 232/memory card interface
Machine Dimensions and Construction
Weight: 14,500 lbs.
Base construction: welded steel Shear Damper™
Way construction: cross-roller linear way system with recirculating bearings and precision ground rails
Foundation: 6" concrete floor is only requirement, three-point antivibration suspension system requiring no floor attachment.